Home / Guides / Start a DOT testing program
Guide for owner-operators and new carriers

How to Start a DOT Drug and Alcohol Testing Program

Eight steps, in the order they have to happen, with the FMCSA rule behind each one. Finish them before your first load and you are ready for the new entrant audit.

Enroll Now See Packages and Prices (800) 498-9820
Last updated: November 16, 2026
New trucking company getting its DOT drug and alcohol program in place

Quick answer

If you operate a commercial motor vehicle that requires a CDL, FMCSA requires you to have a drug and alcohol testing program in place before a driver performs any safety-sensitive work. That applies to a fleet of fifty and to an owner-operator with one truck.

In practice the program has four parts you set up once (Clearinghouse registration, a consortium or random pool, a written policy, and a pre-employment test for each driver) and three parts you keep running (random tests, annual Clearinghouse queries, and records).

Most small carriers hand the administration to a consortium/third-party administrator (C/TPA) such as Sky Drug Testing. The carrier stays responsible for compliance; the C/TPA does the work.

Who needs a DOT drug and alcohol testing program

The FMCSA rules in 49 CFR Part 382 cover every driver who operates a commercial motor vehicle that requires a commercial driver's license, and every employer of such a driver. A vehicle requires a CDL when it:

  • has a gross vehicle weight rating or gross combination weight rating of 26,001 pounds or more, or
  • is designed to carry 16 or more passengers, including the driver, or
  • carries hazardous materials in quantities that require placards.

It does not matter whether you run interstate or intrastate, or whether the driver is full-time, part-time or occasional. An owner-operator is treated as both the employer and the driver and has to meet both sets of duties.

Still opening your company? Our free “How to Open Your Trucking Company” checklist is a step-by-step list of everything you need to get your authority and start running: opentruckingcompany.com.
Not sure you are covered? If your truck is under 26,001 pounds, carries no placarded hazmat and needs no CDL, Part 382 does not apply. A non-DOT workplace program may still make sense; see Non-DOT Drug Testing.

The eight steps, in order

Steps 1 to 5 must be finished before a driver's first trip. Steps 6 to 8 keep you compliant after that.

1

Confirm you are covered and decide who is the employer

Check the three CDL triggers above. Then be clear about who the employer is: the motor carrier whose USDOT number the driver operates under. If you lease on to another carrier, that carrier's program normally covers you. If you run under your own authority, the program is yours to set up.

49 CFR 382.103, 382.107

2

Register in the FMCSA Drug and Alcohol Clearinghouse

Every employer of CDL drivers must register in the Clearinghouse, and so must every CDL driver who needs to respond to a query. Employers buy a query plan there; queries are paid to FMCSA, not to your testing provider.

Owner-operators must also designate a C/TPA inside the Clearinghouse, because someone other than the driver has to report on the employer's behalf.

We walk clients through this on a call: Clearinghouse setup.

49 CFR 382.711, 382.705(b)(6)

3

Join a consortium or set up your own random pool

Drivers must be in a random testing pool from their first day. FMCSA's minimum annual rates for 2026 are 50 percent of driver positions for drugs and 10 percent for alcohol. Selections have to be made by a scientifically valid method, spread through the year, and unannounced.

A one-driver company cannot randomly select from a pool of one, so owner-operators must join a consortium. Small fleets usually do too, because the consortium runs selections, notices and paperwork for them.

See Random Drug Testing and our consortium program.

49 CFR 382.305, 382.103(b)

4

Adopt a written policy and give it to every driver

You need a written drug and alcohol policy that covers the eleven items FMCSA lists, including who to contact with questions, which drivers are covered, what conduct is prohibited, when tests happen, and the consequences of a violation. It must also say that violations are reported to the Clearinghouse.

Each driver signs a receipt for the policy. Keep that receipt; it is one of the first things an auditor asks for.

49 CFR 382.601

5

Pre-employment test, Clearinghouse full query and history check

Before a driver first performs a safety-sensitive function you must have:

  • a verified negative DOT pre-employment drug test result in hand. A test that was taken but not yet reported does not count.
  • a full pre-employment query of the Clearinghouse, run with the driver's electronic consent, showing no unresolved violation.
  • a drug and alcohol history request to previous DOT-regulated employers outside FMCSA (for example, transit or rail) covering the past three years.

There is one limited exception to the pre-employment test for drivers who were recently in another DOT program; details are on our Pre-Employment Drug Testing page.

49 CFR 382.301, 382.701(a), 391.23(e), 40.25

6

Name a Designated Employer Representative (DER)

The DER is the person at your company who receives test results, removes a driver from duty when required, and makes decisions in the testing process. It must be an employee or owner of the company. A consortium can support the DER but cannot be the DER.

49 CFR 40.3, 40.15(d)

7

Train supervisors in reasonable suspicion

Every person designated to supervise drivers must complete at least 60 minutes of training on alcohol misuse and 60 minutes on controlled substances use. Without a trained supervisor, you cannot lawfully order a reasonable suspicion test.

An owner-operator who supervises no one else is not required to take it, but will need it before hiring a second driver. Training is available online: DOT Supervisor Training.

49 CFR 382.603

8

Keep it running: random tests, annual queries and records

  • Random tests all year at the rates in step 3. When a driver is notified, they go to the collection site immediately.
  • Annual limited query of the Clearinghouse for every driver, at least once every 12 months, with a signed consent on file.
  • Records kept in a secure location with controlled access: 5 years for positives, refusals and other violations, 2 years for collection-process records, and 1 year for negative results.
  • New drivers go through step 5 before their first trip, every time.

49 CFR 382.305, 382.701(b), 382.401

Want this handled for you? Our enrollment packages cover steps 2 to 5 and step 8 for owner-operators and trucking companies. Enroll online or call (800) 498-9820.

The six DOT test types and when each one happens

TestWhenDrugAlcohol
Pre-employmentBefore a driver's first safety-sensitive functionRequiredOptional
RandomUnannounced, spread through the year50% of drivers a year10% of drivers a year
Post-accidentAfter a crash that meets the FMCSA criteriaWithin 32 hoursWithin 8 hours (aim for 2)
Reasonable suspicionWhen a trained supervisor observes specific signsRequiredRequired
Return-to-dutyAfter a violation, once the SAP process is completeDirectly observedAs the SAP directs
Follow-upOn the schedule the SAP sets, at least 6 tests in the first 12 monthsDirectly observedAs the SAP directs

What an FMCSA auditor checks

New carriers get a new entrant safety audit within their first 12 months of operation. Two drug and alcohol findings are automatic failures:

  • no alcohol and drug testing program at all, and
  • no random testing program.

Using a driver who refused a test or tested positive is also an automatic failure. Beyond those, expect to be asked for:

  • your written policy and each driver's signed receipt
  • the negative pre-employment result for each driver, dated before their first trip
  • proof of consortium enrollment and a list of drivers in the random pool
  • random selection lists and the test results that followed
  • Clearinghouse registration, pre-employment full queries and annual limited queries
  • supervisor training certificates

We can review your file before the auditor does: Audit Services and Driver Files Management.

49 CFR 385.321

Preparing records for an FMCSA safety audit

Common mistakes that cause violations

Driving before the result is back

The test was taken on Monday and the driver left on Tuesday. The result has to be received and negative first.

Taking a non-DOT test

A walk-in test on a non-federal form does not count. A DOT test uses the Federal Custody and Control Form and an HHS-certified lab.

Skipping the Clearinghouse

Enrolling in a consortium does not register you in the Clearinghouse. They are two separate things and you need both.

Forgetting the annual query

The limited query is due for every driver every 12 months. It is one of the most common audit findings.

Delaying a random test

Once notified, a driver must proceed to the collection site right away. Putting it off can be treated as a refusal.

No signed policy receipt

Having a policy is not enough. Each driver's signed acknowledgment needs to be in the file.

What it costs

There are three kinds of cost, and it helps to keep them apart:

  • Enrollment and annual renewal with your consortium. Our current prices for owner-operators and trucking companies, and exactly what each package includes, are on the Packages page.
  • Clearinghouse queries, bought from FMCSA inside your Clearinghouse account.
  • Individual tests that are not part of your package, such as a post-accident test or a test for a newly hired driver.

Ask what is included before you compare providers. A low enrollment price that leaves out random tests is not the cheaper option by the end of the year.

Questions

Does an owner-operator with one truck need a drug and alcohol testing program?

Yes, if the truck requires a CDL to operate. An owner-operator is both the employer and the driver, so they follow the employer rules in Part 382 and must join a consortium for random testing, because a one-person company cannot run its own random pool.

Can I start driving before my pre-employment drug test result comes back?

No. The employer must receive a verified negative result before the driver first performs a safety-sensitive function, unless the limited exception in 49 CFR 382.301(b) applies.

What happens at a new entrant audit if I have no testing program?

Having no drug and alcohol testing program, or no random testing program, is an automatic failure of the new entrant safety audit under 49 CFR 385.321.

Do owner-operators need supervisor training?

The training in 49 CFR 382.603 is required for every person designated to supervise drivers. An owner-operator who supervises no other driver is not required to take it, but must take it before supervising anyone.

Is the consortium responsible if something is missed?

No. A consortium or third-party administrator does the administrative work, but the motor carrier remains responsible for compliance. That is why it matters to choose one that tells you what is due and when.

Can I get help in Spanish or Punjabi?

Yes. Our team supports clients in English, Spanish and Punjabi by phone at (800) 498-9820.

Ready to set up your program?

Enroll online in a few minutes, or talk to our team first. We handle the consortium, the Clearinghouse setup and the paperwork.

Enroll Now Compare Packages Talk to Us

This guide is general information for motor carriers, not legal advice. Rule references are to Title 49 of the Code of Federal Regulations.